Bigfoot Boards and Components

Bigfoot Trail Camera Controller

     

Standard Programing

  • Pre-programmed to Control Four Different Cameras
  • Standard programming will control Sony P and S40, S600 Cameras and more listed in the dropdown list below
  • Different day and night camera on times allow faster pictures during the day.
  • Advanced Circuitry to Prevent False Triggers
  • Day Only or 24-Hour Settings.
  • Single Picture, Double Picture / Movie Settings.
  • Four Time Delay Settings 8 sec day or 15 sec night, 1 min, 3 min, and 6 min.
  • Simple Sensitivity Adjustment Potentiometer
  • Automatic Walk Test with LED Indicator
  • Auto Reset of Walk Test Duration, Allows Extra Time if Needed
  • Automatically Switches from Walk Test to Operating Mode
  • Long Battery Life  (3 AAA alkaline Batteries Lasts 4 to 6 Months)
  • Plug and Play Camera Connections
  • Integrated Onboard Power Switch
  • Onboard Battery Holder
  • Small Design (only 2.0” by 2.25”)
  • Comes with a adhesive backed switch settings label
  • Clear plastic template included
  • Slave programming
  • Charges slave at power up day or night so you can confirm that the slave and batteries are in order.
  • Refreshes slave only at night when the slave will need to be ready to flash.(battery savings feature)
  • Will only charge the flash after pictures taken at night.
  • You will need the sister board or build your own to attach the slaves negative  and slaves battery negative to.

For Standard Programming ordering options(Program will run any of these 4 cameras using the cam select switch)

Cost: $42.00

Trail Master Programming

  • Pre-programmed to Control Four Different Cameras
  • Standard programming will control the Cameras and more listed below
  • Separate day and night camera on times allow faster pictures during the day..
  • Advanced Circuitry to Prevent False Triggers
  • Day Only or 24-Hour Settings.
  • Single Picture or Trail Master Settings.
  • Four Time Delay Settings 8 sec day or 15 sec night, 1 min, 3 min, and 6 min.
  • Simple Sensitivity Adjustment Potentiometer
  • Automatic Walk Test with LED Indicator
  • Auto Reset of Walk Test Duration, Allows Extra Time if Needed
  • Automatically Switches from Walk Test to Operating Mode
  • Long Battery Life  (3 AAA alkaline Batteries Lasts 4 to 6 Months)
  • Plug and Play Camera Connections
  • Integrated Onboard Power Switch
  • Onboard Battery Holder
  • Small Design (only 2.0” by 2.25”)
  • Comes with a adhesive backed switch settings label
  • Clear plastic template included
  • Trail Master (trailmode)
  • Simply set switch 4 to the on position to activate  Trail Master Mode.
  • At motion turns camera on and shutters first picture
  • Waits with camera on up to 30 seconds for a second animal or event with the camera ready.
  • Can shutter the second picture in less than 5 seconds in the right environment..
  • Will stay on for 30 seconds after the last event or picture and then return to the selected delay routine if one has been chosen.

For Trail mode ordering options(Program will run any of these 4 cameras using the cam select switch)

Cost: $42.00



Video Boards

Video boards
4 Delay Settings: 30 Seconds, 1 Minute, 3 Minutes and 6 Minutes.
4 Record Settings: 15 Seconds , 30 Seconds, 1 Minute and 3 Minutes
Day Only, Night Only or 24 hour option:(using the camswitch )
Comes with Video Camera programming, the pulldown resistor modification, Template and a Video Switch Settings Label
Available options:
Jazz DV150 w/array and amp option(1 sister board for each)
DXG 567V w/array and amp option(1 sister board for each)
Lanc Camcorder w/array and servo control option(1 sister board for each)

Cost: $46.oo

Bigfoot Sister Board

Small Size Only 1/2" by 1 1/4"
Designed to connect to Jazz Or Standard Programmed Bigfoot Board when using a Ir Array, Light or Slave Flash. With this sister board your Bigfoot Trail Camera Controller can also control a IR Array and also a slave flash charging circuit.

Cost: $4.50

Questions or concerns?
Contact us at info@bfoutdoors.com

 
Home   |   Complete Trail Cams   |   Build Your Own Cam (Parts & Supplies)   |   Modification and Operating Documents   |   Links & Resources